The SUP-2100H handheld flow meter can be virtually applied to a wide range of measurements. The measured pipe ranges 20-6000 mm [0.5-200 inch]. A variety of liquid applications can be accommodated.

The LUGB Vortex diameter is accordant to upstream and downstream tubing diameter at the installation point. The sensor is concentric with the pipeline; prohibit gaskets between the sensor and flanges bulge out into the pipeline.

Flow parameter is one of the four important parameters in the process of industrial production detection, and it is also the most difficult parameter to measure. At home and abroad, the throttle device represented by an orifice plate, nozzle, and Venturi tube was the earliest to be used as the flow measurement element, and the differential pressure flowmeter was composed of a pressure guide pipe and a differential pressure transmitter, which was used as the measurement standard. That is, without experimental calibration, the relationship between differential pressure and flow was determined by looking up the table and calculating, and the measurement error could be estimated.

This article describes the precautions during the installation of the rotameter flowmeter, and lists the common faults and solutions of the rotameter in use.

Electroplating refers to a surface processing method in which the cation of pre-plated metal in the plating solution is deposited on the surface of the base metal through electrolysis in a salt solution containing pre-plated metal, using the plated base metal as the cathode! Zinc is a very active metal, which is extremely easy to be oxidized.

Gas flow measurement is an important basis for trade settlement between supply and demand of gas fluids, as well as a key technology and capacity indicator in the production and operation of enterprises. Accurate gas measurement results can ensure the fairness of trade settlement.