SUP-1158-J Wall Mounted Clamp On Ultrasonic Flow Meter

This wall mounted ultrasonic flow meter with clamp on sensor is used in testing equipment filter elements for water purifier. It could be also installed in some residential areas and commonly used for testing water supply and monitoring.
Features For Ultrasonic Flow Meter
• Without cutting pipes
• Real-time measurement
• Various piping material available
• Wide measuring range: DN25~DN1200


An ultrasonic flow meter is a device that uses ultrasonic waves to measure the velocity of a fluid flowing through a pipe. It is commonly used to measure the flow of water in pipelines, and is particularly useful for measuring flow in large pipes or in situations where it is not practical to insert a traditional mechanical flow meter. Ultrasonic flow meters work by sending ultrasonic waves through the fluid in the pipe and measuring the time it takes for the waves to travel through the fluid. By measuring the velocity of the fluid, the flow rate of the water can be calculated.

As the above said, ultrasonic flow meters are instruments that measure flow by detecting the action of fluid flow on an ultrasonic beam (or ultrasonic pulse).
According to the principle of signal detection ultrasonic flowmeter can be divided into propagation velocity difference method, beam shift method, Doppler method, mutual correlation method, spatial filtering method and noise method. Each type has its own advantages and disadvantages, and the best choice for a particular application will depend on the specific needs of the user.

Ultrasonic flowmeter and electromagnetic flowmeter, as the instrument flow channel is not set up any obstruction parts, are no obstruction flowmeter, is suitable for solving the flow measurement of difficult problems of a class of flowmeter, especially in the large diameter flow measurement has more outstanding advantages, it is one of the rapid development of a class of flowmeter.


Performance specifications

Flow range: 0.03 ~ 16 ft/s ( 0.01 ~ 5.0 m/s ).
Accuracy: ± 1.0 %.
Pipe size: Clamp-on: 1” ~ 48” ( 25mm ~ 1200mm ).
Fluid: Water
Function specifications

OCT Pulse output: 0-5000Hz.

Analog output: 4 ~ 20mA, max load 750Ω.
Communication interface: RS485 MODBUS.
Power supply: 10 ~ 36VDC/1A.
Keypad: 16 ( 4×4 ) key with tactile action.
Display: 20×2 lattice alphanumeric, back lit LCD.

Transmitter: 14 °F to 122 °F ( –10~ 50);

Transducer: 32 °F to 176 °F ( 0~ 80).
Temperature: Common 0~80(80~150high temperature optional)
Humidity: Up to 99% RH, non-condensing.
Physical specifications

Transmitter: PC/ABS, IP65.

Transducer: Encapsulated design, IP68.
Transducer cable: Standard cable length: 30 ft (9m).
Weight: Transmitter: approximately 0.7kg  Transducer: approximately 0.4kg



The flow meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers. The difference in the transit time measured is directly and exactly related to the velocity of the liquid in the pipe.  


Real-time measurement

Various piping material available: Carbon steel pipe, stainless steel pipe, PVC pipe 

Wide measuring range: DN25~DN1200

Wide voltage power supply: 10-36V

RS485 Communication intelligent remote 

Ingress protection: IP68

Piping material: limited to external clamps,single material; No: lining, PMMA, cement pipe, water scale   


• Higher upfront cost: Ultrasonic flowmeters are significantly more expensive than many of the other inline flowmeter options available today.
Substance limitations: Ultrasonic flowmeters cannot be used for heavily contaminated liquids or slurry.


Supmea is an experienced & leading manufacturer and supplier of liquid flow meters, located in Hangzhou, China, with offices at home and abroad. The ultrasonic flow measurement products provided by Supmea include clamp-on ultrasonic flow meters, handheld ultrasonic flow meters , and wall-mounted ultrasonic flow meters. Supmea's flow meter products are exported to 127 countries and regions such as Germany, Russia, Malaysia, Singapore, Vietnam, and Pakistan, and are well-received by users. If you want to know more about the product requirements of water flow meters and other process control instruments, please leave a message and we will reply to you in a timely manner.

 Related Products

SUP-1158S Wall Mounted Clamp On Ultrasonic Flow Meter

SUP-2000H Handheld Ultrasonic Flow Meter

After-sales service
  • After-sales service team
    Special after-sales engineers with years of experiences to provide online assistance all day.
  • Product warranty
    The product is guaranteed within 12 months (except for consumables such as ph sensor)
  • Technical support
    Professional engineers guide the operation combined with years of industry experience and instrument use experience.
  • Discount for regular customer
    Customers who have cooperated with us will receive exclusive promotion information on our social media