SUP-2000H Handheld Ultrasonic Flow Meter

This flowmeter can be virtually applied to a wide range of measurement. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent. etc
Features
• Without cutting pipes
• Real-time measurement
• Various piping material available
• Wide measuring range: DN25~DN6000
Details

INTRODUCTION

The SUP-2000H handheld ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed conduit. The transducers are a non-contacting, clamp-on type, which will provide benefits of non- fouling operation and easy installation.


The SUP-2100H transit time handheld ultrasonic flow meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a specific distance from each other. The transducers can be mounted in V-method where the sound transverses the pipe twice, or w-method where the sound transverses the pipe four times, or in Z-method where the transducers are mounted on opposite sides of the pipe and the sound crosses the pipe once. This selection of the mounting method depends on pipe and liquid characteristics. The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers. The difference in the transit time measured is directly and exactly related to the velocity of the liquid in the pipe.


A handheld ultrasonic flow meter is a portable device used to measure the flow of liquids in pipes or open channels. It works by emitting ultrasonic waves through the fluid and measuring the time it takes for the waves to travel between the two transducers in the device. The flow rate is then calculated based on the velocity of the fluid and the cross-sectional area of the pipe or channel.

Handheld ultrasonic flow meters are designed to be portable and easy to use, making them ideal for on-site flow measurements in a variety of applications. They can be used on both clean and dirty fluids, and are capable of measuring a wide range of flow rates.


The SUP-2000H handheld ultrasonic flow meters come with advanced features such as data logging, wireless connectivity, and the ability to measure flow in both directions. These features make them even more versatile and useful for a range of applications.

APPLICATION

The SUP-2100H handheld ultrasonic flow meters can be virtually applied to a wide range of measurements. The measured pipe ranges 20-6000 mm [0.5 - 200 inch]. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent, etc. Because the instrument and transducers are non-contacting and have no moving parts, the flow meter can not be affected by system pressure, fouling or wear. standard transducers are rated to 110℃. Higher temperatures can be accommodated. For further information, please consult the manufacturer for assistance.


PARAMETER   

Performance specifications

•Linearity: 0.5%
•Repeatability: 0.2%
•Accuracy: ±1% of reading at rates>0.2 mps
•Response Time: 0-999 seconds, user-configurable
•Velocity: ±10m/s
•Pipe Size: 20mm-6000mm
•Rate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.
•Totalizer: 7-digit totals for net, positive and negative flow respectively
•Liquid Types: Virtually all liquids
•Security: Setup values Modification Lockout. Access code needs unlocking
•Display: 4x8 Chinese characters or 4x16 English letters
•Communication Interface: RS-232C, baud-rate: from 75 to 57600. Protocol made by the manufacturer and compatible with that of the FUJI ultrasonic flow meter. User protocols can be made on enquiry.
•Transducers: Model M1 for standard, other 3 models for optional
•Transducer Cord Length: Standard 2x10 meters, optional 2x 500 meters
•Power Supply: 3 AAA Ni-H built-in batteries. When fully recharged it will last over 10 hours of operation.
•Data Logger: Built-in data logger can store over 2000 lines of data
•Manual Totalizer: 7-digit press-key-to-go totalizer for calibration
•Housing Material: ABS
•Case Size: 180x145x40mm
•Handset Weight: 514g (1.2 lbs) with batteriesLinearity 0.5%
  

 ADVANTAGE  

•0.5% of linearity
•0.2% of repeatability
•Bilingual interface in Chinese and English
•4 flow totalizers
•Patent balanced lower-voltage multi-pulse
•built-in date totalizers ultrasonic igniting
•built-in data-logger
•Work properly near transverters
•0.5 second totalizing period
•100 Pico-second resolution of time measurement 


DISADVANTAGE 
•Substance limitations: Ultrasonic flowmeters cannot be used for heavily contaminated liquids or slurry.

• Higher upfront cost: Ultrasonic flowmeters are significantly more expensive than many of the other inline flowmeter options available today.


 


Applications
After-sales service
  • After-sales service team
    Special after-sales engineers with years of experiences to provide online assistance all day.
  • Product warranty
    The product is guaranteed within 12 months (except for consumables such as ph sensor)
  • Technical support
    Professional engineers guide the operation combined with years of industry experience and instrument use experience.
  • Discount for regular customer
    Customers who have cooperated with us will receive exclusive promotion information on our social media