SUP-EC8.0 digital conductivity meters are used in industrial measuring of the temperature, conductivity, Resistivity, salinity and total dissolved solids, such as waste water treatment, environmental monitoring, pure water, sea farming, food production process, etc.
This electrical conductivity meter can be panel, wall or pipe mounted. SUP-EC8.0 conductivity meter provides two current outputs. The maximum load is 500Ω. Plus, it provides 3 relays and can pass though a maximum of 5A/250VAC or 5A/30VDC.
Functions | EC | Resistivity | Salinity | TDS |
Measuring range | 0.00uS-2000 mS | 0.00-20.00 MΩ-CM | 0.00-78.00 g/Kg | 0-133000 ppm |
Resolution | 0.01/0.1/1 | 0.01 | 0.01 | 1 |
Accuracy | ±1%F.S. | ±1%F.S. | ±1%F.S. | ±1%F.S. |
Temp. compensation | Pt1000/NTC30K | |||
Temp. range | -10.0 to +130.0℃ | |||
Temp. compensation range | -10.0 to +130.0℃ | |||
Temp. resolution | 0.1℃ | |||
Temp. accuracy | ±0.2℃ | |||
Cell constant | 0.001 to 20.000 | |||
Ambient temp. range | 0 to +70℃ | |||
Storage temp. | -20 to +70℃ | |||
Display | Back light, dot matrix | |||
EC current output1 | Isolated, 4 to 20mA output , max. load 500Ω | |||
Temp. current output 2 | Isolated, 4 to 20mA output , max. load 500Ω | |||
Current output accuracy | ±0.05 mA | |||
RS485 | Modbus RTU protocol | |||
Baud rate | 9600/19200/38400 | |||
Maximum relay contacts capacity | 5A/250VAC,5A/30VDC | |||
Cleaning setting | ON: 1 to 1000 seconds, OFF: 0.1 to 1000.0 hours | |||
Multifunction relay | clean/period alarm/error alarm | |||
Relay delay | 0-120 seconds | |||
Data logging capacity | 500,000 | |||
Language selection | English/traditional Chinese/simplified Chinese | |||
Waterproof grade | IP65 | |||
Power supply | 90~260 VAC, power consumption < 7 W | |||
Installation | panel/wall/pipe installation | |||
Weight | 0.85Kg | |||
